| A: |
Pour a minimun of 6 quarts for a 3 gallon and 10 quarts for a 5 gallon fountain. After pouring the liquid into the lower reservoir, turn the switch to ON. If the beverage does not circulate within 1 minute: turn the fountain OFF for 10 seconds. Repeat serveral times until the beverage flows freely. If this does not work, pour the beverage into the top reservoir, with the fountain running, until the pump is activated.
If the circulation is not strong enough, there is an adjustment on the side of the large column that has the lights inside. Use a flat screwdriver to adjust the flow up or down as needed. Place the screwdriver through the hole in the side of the column. Be careful to not adjust the screw all the way out or the adjustment screw will fall out.
NEVER RUN THIS FOUNTAIN DRY OR IMMERSE THE BASE IN WATER.
Cleaning
After use, empty the remaining beverage and fill the lower reservoir with 2 gallons of warm water. Let circulate for 10 minutes. Empty and repeat again until clean.
NEVER USE SCOURING PADS OR ANYTING ABRASIVE.
|
